Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- mcv:hitachiboards [2017-09-01 13:16] – cas
+++ mcv:hitachiboards [2017-09-01 14:07] (aktuell) – [Dateien] cas
@@ Zeile 1: / Zeile 1: @@
 ====== TDS 2020F mit Hitachi H8/532 ======
-{{ :mcv:tds2020f-hitachih8-532-set.jpg?400|}}
+{{ :mcv:tds2020f-hitachih8-532-close.jpg?400|}}
-{{:mcv:tds2020f-hitachih8-532-close.jpg?400|}}
    * 2 Serielle RS232 Ports
@@ Zeile 15: / Zeile 14: @@
 ===== Kit Inhalt =====
+{{ :mcv:tds2020f-hitachih8-532-set.jpg?400|}}
   * Board TDS2020F
@@ Zeile 23: / Zeile 24: @@
   * 32K EEPROM
   * 32K RAM
+The TDS2020F is based on the Hitachi 16-bit H8/532 microprocessor. There are 45k bytes of space for your compiled program and up to 512k bytes of Flash memory or battery-backed RAM to keep vital data while the board is not working. This can be expanded to over a gigabyte with plug-in PCMCIA or Compact Flash cards.
+The Analog to Digital converter has eight channels of 10-bit resolution (better than 1 in 1000) and there are three channels of 8-bit Digital to Analog (1 in 250). Both can readily be expanded with off-card chips. Driver software is available for 12 and 16-bit A to D converters connected in parallel, or remotely through a serial SPI or PC interface.
+The board has between 26 and 41 Parallel I/Os depending on the other options selected and there are two RS232 Serial Ports. Additional features include four hardware Counter-Timers (three are 16-bit), two separate Watchdog Timers and Multitasking. An on-board clock provides date and time to be kept alone side your data. The single power supply draws 32mA with only 155pA in a low power operational mode for datalogging. Regular automatic wakeup assures sub-milliamp powerconsumption and long battery life.
+The TDS2020F measures 100 x 80mm.
+It has pin headers for connection by ribbon cable, or simply use it as a component inserted on a larger board. Another version has a DIN41612 connector for use in a rack.
 Dieses Kit wurde von Norbert Lott zur Verfügung gestellt.
@@ Zeile 28: / Zeile 38: @@
 **Im Verleih seit**: August 2017
-**Forth-Systeme**: Flash-Forth, 16K ANS-Forth (mit Assembler, Multitasking,
+**Forth-Systeme**: Flash-Forth, 16K ANS-Forth (mit Assembler, Multitasking)
 **Ausleihstatus**: verfügbar :-D
+==== Dateien ====
+   * {{ :mcv:tds-2020f.pdf | TDS2020F Technical Data}}
+   * {{ :mcv:tds2002f-tds2020cm2.pdf |TDS2020F und TDS2020CM2 Technical Data}}
+   * {{ :mcv:tds-newsletter.pdf | TDS Newsletter}}
+   * {{ :mcv:tds-newsletter2.pdf | TDS Newsletter 2}}
+   * {{ :mcv:tds-pricelist-200004.pdf | TDS Preisliste April 2000}}
 ----
@@ Zeile 50: / Zeile 67: @@
   * CAN tranciever für ISO/DIS 11898 über DB9 Anschluss
   * 5V DC (Netzteil nicht Bestandteil des Kits!)
 {{:mcv:hitachi-evb2623f.jpg?300 |}}
 Dieses Kit wurde von Michael Kalus zur Verfügung gestellt.