Forth-eV Wiki

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.
====== TDS 2020F mit Hitachi H8/532 ======

{{ :mcv:tds2020f-hitachih8-532-close.jpg?400|}}

   * 2 Serielle RS232 Ports
   * 32k-8MB (32K im Kit)
   * Programmspeicher: 45k
   * 10bit A-D Kanaele: 8
   * 8bit A-D Kanaele: 3
   * I2C serieller Bus
   * RTC uhr
   * Power: +6-+16V DC / 31mA
   * CPU: 16bit H8/532

===== Kit Inhalt =====

{{ :mcv:tds2020f-hitachih8-532-set.jpg?400|}}

  * Board TDS2020F
  * TDS2020F Technical Manual (englisch), 444 Seiten
  * Hitachi H8/500 series Programming Manual (englisch), 170 Seiten
  * Hitachi H8/532 Hardware Manual (englisch), 449 Seiten
  * CD-ROM mit Dokumentation und TDC-PC Entwicklungsumgebung
  * 32K EEPROM
  * 32K RAM

The TDS2020F is based on the Hitachi 16-bit H8/532 microprocessor. There are 45k bytes of space for your compiled program and up to 512k bytes of Flash memory or battery-backed RAM to keep vital data while the board is not working. This can be expanded to over a gigabyte with plug-in PCMCIA or Compact Flash cards.
The Analog to Digital converter has eight channels of 10-bit resolution (better than 1 in 1000) and there are three channels of 8-bit Digital to Analog (1 in 250). Both can readily be expanded with off-card chips. Driver software is available for 12 and 16-bit A to D converters connected in parallel, or remotely through a serial SPI or PC interface.

The board has between 26 and 41 Parallel I/Os depending on the other options selected and there are two RS232 Serial Ports. Additional features include four hardware Counter-Timers (three are 16-bit), two separate Watchdog Timers and Multitasking. An on-board clock provides date and time to be kept alone side your data. The single power supply draws 32mA with only 155pA in a low power operational mode for datalogging. Regular automatic wakeup assures sub-milliamp powerconsumption and long battery life.

The TDS2020F measures 100 x 80mm.

It has pin headers for connection by ribbon cable, or simply use it as a component inserted on a larger board. Another version has a DIN41612 connector for use in a rack.

Dieses Kit wurde von Norbert Lott zur Verfügung gestellt.

**Im Verleih seit**: August 2017

**Forth-Systeme**: Flash-Forth, 16K ANS-Forth (mit Assembler, Multitasking)

**Ausleihstatus**: verfügbar :-D

==== Dateien ====

   * {{ :mcv:tds-2020f.pdf | TDS2020F Technical Data}}
   * {{ :mcv:tds2002f-tds2020cm2.pdf |TDS2020F und TDS2020CM2 Technical Data}}
   * {{ :mcv:tds-newsletter.pdf | TDS Newsletter}}
   * {{ :mcv:tds-newsletter2.pdf | TDS Newsletter 2}}
   * {{ :mcv:tds-pricelist-200004.pdf | TDS Preisliste April 2000}}
----

====== Hitachi EVB 2623F ======

{{ :mcv:hitachi-evb2623f-02.jpg?300|}}
{{ :mcv:hitachi-evb2623f-03.jpg?300|}}
  * 20MHZ H8S/2623F CPU (HD64F2623F20)
  * 256KB RAM (16 bit words)
  * 256KB Flash mit HDI-M firmware monitor
  * 12KB internal RAM
  * 2 LEDs
  * 3 Taster
  * Host (UART) Interface RS232 DB9
  * User (SCI2) Interface RS232 DB9
  * on chip CAN modul für CAN spec 2.0a und 2.0b
  * Programmierrate bis zu 1Mbit/s
  * CAN tranciever für ISO/DIS 11898 über DB9 Anschluss
  * 5V DC (Netzteil nicht Bestandteil des Kits!)

{{:mcv:hitachi-evb2623f.jpg?300 |}}

Dieses Kit wurde von Michael Kalus zur Verfügung gestellt.

**Im Verleih seit**: Dezember 2012

**Forth-Systeme**: 

**Ausleihstatus**: verfügbar :-D